Skip to Main Content

Unfiltered SCR DC Basic Speed Control

Search by Specification (Parameter Search)

Torque Units
Speed Units
Power Units

Filter By:

Back

Unfiltered SCR DC Basic Speed Control

Unfiltered SCR DC Basic Speed Control

Application Information

  • Extended 2-year system warranty when a Bodine gearmotor/motor and control are purchased together.
  • Rated for continuous operation in 40° ambient with no additional heat sink.
  • Drives Bodine 130V Permanent Magnet DC Motors.
  • Drives 90V "SCR duty" and 130V "PWM duty" permanent magnet DC motors made by other manufacturers.

STANDARD FEATURES
  • Operates from 115 Volt AC line.
  • Line voltage compensation minimizes speed drift.
  • NEMA 1 enclosure for environmental protection.
  • Back EMF feedback maintains better than 2% speed regulation.
  • Dip switches to easily calibrate control for different motor sizes.
  • Two diagnostic LEDs indicate when power is on and when current output is at limit set by TORQ pot.
  • Trim pots on PC board to adjust torque limit, minimum speed limit, maximum speed limit, acceleration time, deceleration time, and speed regulation.
  • Speed can be adjusted manually using speed pot mounted on enclosure.
  • Terminal block inside enclosure for quick motor connection.
  • Fuse holder for line on front panel.
  • Toggle switch on enclosure to turn AC power on/off.
  • Lamp on enclosure indicates AC power on.
  • Factory installed AC line cord.
  • Unfiltered drive draws lower AC line current than comparable SCR filtered controls.
  • Connections for optional user-supplied inhibit switch.

Need help finding the right parts?

We have all the expertise you need to get the job done. Contact us today!