Model 1160 Metric 24A-Z Series Parallel Shaft DC Gearmotor
Search by Specification (Parameter Search)
Metric 24A-Z Series Parallel Shaft DC Gearmotor
|Rated Torque (Nm)||2.0|
|Rated Torque (lb-in)||18|
|Peak Torque (Nm)||8.3|
|Peak Torque (lb-in)||75|
|Radial Load (N)||555|
|Radial Load (lbs)||125|
|Length XH (mm)||199|
|Length XH (inch)||7.82|
Safety Data Sheets
- Metric mounting threads and metric drive shaft dimensions.
- 24A Motor provides high starting torque, adjustable speed, and predictable performance under a range of operating conditions.
- Unvented gearhousing.
- Industrial lip type seals on motor and output shafts.
- Needle bearing on output shaft for increased radial load capacity and long life.
- Permanently lubricated gearing utilizing oil for long life.
- Wide reinforced thermoplastic helical gear on input stage for quietness and wide hardened steel spur gears on subsequent stages for high output torque and long life.
- Helical pinion accurately cut on motor shaft for maximum strength and minimum noise.
- Noise-tested ball bearings permanently lubricated.
- Locked bearing minimizes endplay.
- Performance ratings of 180V models are based on use with an unfiltered SCR speed control (Form Factor = 1.6).