Tag Archives: Permanent Magnet DC Gearmotors

New High-Torque PMDC Gearmotors 12/24V or 90/130 VDC

New High-Torque PMDC Gearmotors 12/24V or 90/130 VDC

The new 42A5-FX is a completely redesigned permanent magnet DC (PMDC) parallel shaft gearmotor that provides up to 40% more torque than previous E/F models. Forty (40) new stock models are offered with either 12/24VDC or 90/130 VDC rated motor windings. New synthetic lubricant allows the FX gearhead to operate at a wider temperature range



 VIEW
Permanent Magnet (PM) DC Gearmotors and Motors

Permanent Magnet (PM) DC Gearmotors and Motors

Features and Benefits of PMDC Gearmotors and Motors: Continuous duty operation DC power supply (battery or speed controls – 12/24V, 90/130V, 180V) Reversibility at rest or during rotation with current limiting Relatively constant and adjustable speed Starting torque 175% and up of rated torque High starting current, relative to full load running current Design and



 VIEW
Selecting DC Motor Speed Controls for PMDC Gearmotors

Selecting DC Motor Speed Controls for PMDC Gearmotors

Basic DC motor speed controls accomplish the conversion of AC power to DC with varying degrees of DC voltage “purity.” For proper control selection you’ll need to identify which performance criteria are important to your application. We’ll review how different speed controls affect the quality of DC output and consequently, the performance of your DC



 VIEW
Low-Voltage DC Motor Speed Controls (12 & 24V) for PMDC Gearmotors and Motors

Low-Voltage DC Motor Speed Controls (12 & 24V) for PMDC Gearmotors and Motors

Bodine Electric Company developed four new stock models to provide simple and reliable speed control for low-voltage 12 or 24V PMDC gearmotor and motor applications (up to 1/3 HP / 250 Watts). The controls utilize pulse width modulation (PWM) technology to insure quiet operation, low operating temperature and optimal brush life. The controls feature five trim pots to



 VIEW
Design Tips for Gearmotor Applications

Design Tips for Gearmotor Applications

To select the best gearmotor for an application, one must go into more detail than just selecting the best suitable output speed and torque. Here are five criteria you should consider. 1. Gearmotor Mounting Orientation Gearmotors are typically designed to be mounted with the gearbox level with the motor, and with the drive shaft in



 VIEW
Selecting Fractional Horsepower (FHP) Gearmotors for Long-Life Applications

Selecting Fractional Horsepower (FHP) Gearmotors for Long-Life Applications

Buyers should first decide what kind of operating life is needed. If durability is not an issue, or if the duty is so intermittent that even a short-life (“throw-away”) motor will translate into years of operation, then you’ll want to go with the best price. But if product quality and reputation depends on reliability and



 VIEW
Measuring Armature Circuit Resistance in a PMDC Motor

Measuring Armature Circuit Resistance in a PMDC Motor

Application Notes & Gearmotor Tips: When a permanent magnet DC (PMDC) motor fails to operate properly, or fails to run at all, one sensible troubleshooting step is to measure the winding resistance to determine if there’s an open circuit or a short circuit, either between turns of the same winding, between two windings in the



 VIEW
What does IR Compensation mean, and what is it used for?

What does IR Compensation mean, and what is it used for?

The IR compensation method is used to provide the speed regulation in our DC motor speed controls. When the load of a PMDC motor increases, the amount of current that the motor draws also increases. Per the performance characteristics of permanent magnet DC (PMDC) motors, an increase in load will cause a decrease in speed, because



 VIEW
Considerations for Traction Motor Applications -- AC, BLDC or PMDC Motors

Considerations for Traction Motor Applications — AC, BLDC or PMDC Motors

  A ”traction motor” is a motor or gearmotor used in a traction application. Golf carts, electric vehicles, locomotives, lift trucks, etc. Often “traction motors” also have mounting features, temperature sensors, wiring terminals that are useful in mounting the motors in a vehicle. They may also have a higher level of environmental protection against dust



 VIEW
2012 Standard Products Catalog

2012 Standard Products Catalog “S-17a” from Bodine Electric Company

The updated Catalog “S-17a” is now available for download! We completely redesigned our standard product catalog to make it even easier for you to find the right gearmotor or drive system for your application. Designed as a print companion to our web site, it features detailed specifications for over 1,200 AC induction, permanent magnet DC



 VIEW