Tag Archives: PMDC Gearmotor

Brush Replacement for a Bodine type 24A permanent magnet DC (PMDC) stock gearmotor or motor

Brush Replacement for a Bodine type 24A permanent magnet DC (PMDC) stock gearmotor or motor

Watch this video to learn how to inspect and replace the carbon brushes and brush springs in a Bodine type 24A permanent magnet DC (PMDC) stock gearmotor or motor. To watch, click here. To download these instructions as a PDF, please visit our Literature page: https://www.bodine-electric.com/literature/brush-maintenance/ Copyright Bodine Electric Company © 07/2021. All rights reserved.



 VIEW
Gearmotors for Commercial Food Equipment

Gearmotors for Commercial Food Equipment

Bodine Electric is a proud supplier to many OEMs in the food equipment industry. Our engineers have designed gearmotor solutions for applications in pizza conveyor ovens, pita bread production, mixers, pumps, and beverage dispensers. Some of our newer gearmotors are rated IP-66 and can withstand moisture, grime and water jets. For more info, please visit:



 VIEW
PMDC Gearmotors for Stairlift Applications

PMDC Gearmotors for Stairlift Applications

We manufacture right-angle, single-stage type -6RX gearmotors with three different permanent magnet DC motor options. The 6RX gearmotor can be configured with single drive shaft, double drive shaft or hollow shaft option. Shaft diameters for solid output shafts range from 0.5 to 0.75 inch O.D., and hollow shaft versions are available up to 5/8 inch



 VIEW
Powerful, Efficient Hypoid Gearmotors

Powerful, Efficient Hypoid Gearmotors

Right-angle gearmotors with hypoid gearsets have several advantages over standard worm and worm-gear gearmotors. While they cost more to manufacture, hypoid gearmotors are more efficient, produce less heat, provide higher torque, and are usually smaller than equivalent gearmotors with worm- and worm-gear reducers. More Efficient at Low Speeds and High Reductions Hypoid gears require less



 VIEW
Gearmotor Winding Options - AC, PMDC, and BLDC (EC)

Gearmotor Winding Options – AC, PMDC, and BLDC (EC)

Winding design is one of the major factors that determines gearmotor performance. For example, the windings may be driven by AC or DC current. They may require a capacitor, or a control to run, and may be configured as single, split- or three-phase systems. Some motor types provide precise speed and position control, while others



 VIEW
Planetary Gearmotors Deliver Precise Motion

Planetary Gearmotors Deliver Precise Motion

24 VDC gearmotors provide precise positioning for mobile motion control application: A manufacturer of mobile antenna systems required two gearmotors to position the antenna to connect to orbiting telecommunications satellites. The gearmotors deliver precise motion during the initial calibration with the satellite, and then remain idle until the antenna is moved to a new location.



 VIEW
New 34R4-WX AC Inverter Duty Stock Models Now Available

New 34R4-WX AC Inverter Duty Stock Models Now Available

Our WX gearhead is now available with our inverter-duty, AC three-phase type 34R4 winding. The WX is a high-torque gearhead, built to provide longer life and higher performance than gearmotors of similar size. The dual voltage, 230/460VAC rated winding makes this gearmotor compatible with many AC inverter drives (VFDs) and for many industrial applications. The



 VIEW
Gearmotor Tips from Bodine Electric: Type 33A or 42A DC Motor Brush Replacement

Gearmotor Tips from Bodine Electric: Type 33A or 42A DC Motor Brush Replacement

In this Gearmotor Tips video, we demonstrate how to inspect and replace the carbon brushes in a Bodine type 33A or 42A permanent magnet DC (PMDC) stock gearmotor or motor. Our stock 33A and 42A PMDC gearmotors and motors use a unique method of maintaining a constant force on the motor brushes. A roll-type spring



 VIEW