Tag Archives: BLDC

New 24VDC, 8-pole, 120°-Comm BLDC Speed Control for CI/D1 Gearmotors: Model 3917

The new type ABL-3917 BLDC Control operates from a 24VDC power supply or battery. This control was designed to power our 24V brushless DC, 34B6-FX, Class I/Division 1, for Hazardous Locations, Parallel Shaft BLDC Gearmotor with 8-pole winding and 120° commutation. For more information, please visit: https://www.bodine-electric.com/products/brushless-dc-controls/low-voltage-brushless-dc-controls-120-commutation-8-pole/3917/ Copyright Bodine Electric Company © 05/2023. All rights reserved.



VIEW

New CI/D1 Explosion-Proof AC & BLDC Type “FX” Gearmotors

Now available: (40) all-new CI/D1, Explosion-Proof AC and BLDC gearmotors for use in Hazardous Locations. AC models are offered with either 230VAC or 460VAC Inverter-Duty (3-ph) windings. Our brushless DC models are offered with 12V or 24VDC winding options. The products meet IP-66. Available ratios are 5:1 to 300:1, with rated torque up to 350



VIEW

Updated 34B/SR-WX Brushless DC Gearmotors – 12/24VDC, CI/D2

Brushless DC Gearmotors with Built-In Speed Control. Easy Set-Up! These new 34B/SR-WX, brushless DC, 12 or 24VDC, INTEGRAmotor gearmotors are ideal for low-voltage applications in remote locations that operate off-grid, from battery or solar power. The new geared motors are also suitable for a wide range of industrial or medical applications that only allow low-voltage



VIEW

Gearmotor Winding Options – AC, PMDC, and BLDC (EC)

Winding design is one of the major factors that determines gearmotor performance. For example, the windings may be driven by AC or DC current. They may require a capacitor, or a control to run, and may be configured as single, split- or three-phase systems. Some motor types provide precise speed and position control, while others



VIEW

Planetary Gearmotors Deliver Precise Motion

24 VDC gearmotors provide precise positioning for mobile motion control application: A manufacturer of mobile antenna systems required two gearmotors to position the antenna to connect to orbiting telecommunications satellites. The gearmotors deliver precise motion during the initial calibration with the satellite, and then remain idle until the antenna is moved to a new location.



VIEW

New 34R4-WX AC Inverter Duty Stock Models Now Available

Our WX gearhead is now available with our inverter-duty, AC three-phase type 34R4 winding. The WX is a high-torque gearhead, built to provide longer life and higher performance than gearmotors of similar size. The dual voltage, 230/460VAC rated winding makes this gearmotor compatible with many AC inverter drives (VFDs) and for many industrial applications. The



VIEW

New Planetary Brushless DC Gearmotors

The new type 22B4-60P gearmotors combine our high-performance 22B brushless DC motor with the all-new type -60P planetary (60mm) gearhead. The gearmotors’ relatively small diameter, wide



VIEW

Brushless DC Gearmotor Overview – Features and Benefits

Brushless DC (EC) Gearmotors and Motors – What Is a Brushless DC Motor? Brushless DC motors could be called “inside-out permanent magnet motors” because brushless DC motors have their magnets on the rotating part of the motor instead of on the stationary part. Accordingly, they have their windings on the stationary part of the motor



VIEW

Introduction to Brushless DC (EC) Motor and Gearmotor Technology

Brushless DC Gearmotors and Motors In Section 3.1 of the Bodine Electric Handbook we discuss how motor action is achieved in a conventional permanent magnet DC (PMDC) motor. A segmented commutator rotating within a stationary magnetic field causes mechanical switching of the armature current. In a brushless DC (BLDC) gearmotor or motor, the magnetic field



VIEW

New 34B/FV-F INTEGRAmotor BLDC stock gearmotors

We just added a new series of 24V brushless DC (ECM) gearmotors to our standard INTEGRAmotor™ product line. The new type 34B4/FV-F gearmotors combine a PWM speed control, a brushless DC motor, a high-torque gearhead, and an optical encoder into one high-performance drive package. The 34B/FV-F gearmotors provide 1/4 hp (187 watts) and up to 341 lb-in. (39 Nm)



VIEW