Bodine Products - Bodine Electric Support

Planetary BLDC Gearmotors- Type 22B-60P (24V & 130VDC)

The new type 22B4-60P gearmotor combines our high-performance 22B brushless DC motor with the all-new type-60P planetary (60mm) gearhead. The gearmotor’s small diameter and predictable variable speed performance make it an ideal drive for industrial automation, pumps, packaging equipment and many other industrial applications.

Download PDF
E-Mail

Hypoid PMDC Gearmotors – 12 or 24VDC

The new type 33A7-25H2 and 33A7-30H3 low-voltage hypoid gearmotor combines our high-performance 33A PMDC motor with our all new hypoid gearheads. The gearmotor’s high torque and efficient performance make it an ideal drive for battery or solar-powered gates, industrial conveyor systems, AGVs, mobile industrial equipment, or food-processing equipment. Bodine literature no. 07481128A (Last update 09/2020).

Download PDF
E-Mail

42R6-HG/H [AC] Hollow Shaft and 42R6-HG Parallel Shaft Offset Gearmotors

Bodine type 42R6-HG parallel shaft offset gearmotors provide flexible mounting and high torque in a small package. They combine a 42R frame AC inverter-duty motor with either a regular or hollow shaft type HG gearhead. New HG/H hollow shaft models eliminate the need for shaft couplings and extra mounting hardware. They can be fitted with either single- or dual-drive shafts. Bodine literature no. 07481135A (Last update 08/2021).

Download PDF
E-Mail

33A7-HG/H [PMDC] Hollow Shaft and 33A7-HG Parallel Shaft Offset Gearmotors

Bodine type 33A7-HG parallel shaft offset gearmotors provide flexible mounting and high torque in a compact package. They combine a high-performance type 33A permanent magnet DC (PMDC) frame motor with either a regular or hollow shaft type HG gearhead. HG/H hollow shaft models eliminate the need for shaft couplings and extra mounting hardware. They can be fitted with either single- or dual-drive shafts. Bodine literature no. 07481134A (Last update 08/2021).

Download PDF
E-Mail

34R6-FX AC C1/D1 Inverter-Duty Ex-Proof Gearmotors

These new AC inverter-duty explosion-proof 34R6BXPP-FX gearmotors and 34R6BXPP motors meet NEC Class I, Division 1 requirements for use in environments where ignitable concentrations of flammable gases, vapors or liquids are likely to exist under normal operating conditions. Available with either 230VAC or 460VAC 3-phase windings, and gear ratios from 5:1 to 300:1. Up to 350 lb-in (40 Nm) of continuous torque. The gearmotors and motors also meet IP-66. Bodine literature no. 07481125A (Last update 05/2021).

Download PDF
E-Mail

34B6-FX BLDC C1/D1 Brushless Dc Ex-Proof Gearmotors

These new brushless DC 34B6BXBL-FX explosion-proof gearmotors and 34B6BXBL motors meet NEC Class I, Division 1 requirements for use in environments where ignitable concentrations of flammable gases, vapors or liquids are likely to exist under normal operating conditions. The new 34B-FX gearmotors and motors feature a new, stronger 8-pole winding, and are designed for BLDC controls with 120° commutation. Available with either 12 or 24VDC windings, and gear ratios from 5:1 to 300:1. Up to 350 lb-in (40 Nm) of continuous torque. The gearmotors and motors also meet IP-66. Bodine literature no. 07481124A (Last update 05/2021).

Download PDF
E-Mail

34R-FX AC C1/D2 Inverter-Duty Gearmotors / IP-44

These 34R-FX AC three-phase, inverter-duty gearmotors feature a factory-installed terminal box and terminal block, and meet IP-44. The gearmotors also meet NEC Class I, Division 2 standards for use in environments where flammable gases or vapors may accidentally be spilled or leak into the operating area. The dual voltage, 230/460VAC rated winding makes these gearmotors compatible with many AC inverter drives (VFDs). Bodine literature no. 07481131A (Last update 04/2021).

Download PDF
E-Mail

34R-FX AC C1/D2 Fixed-Speed PSC Gearmotors / IP-44

Our 34R-FX permanent split capacitor (PSC) gearmotors are shipped with a factory-installed terminal box, terminal block, and pre-wired run capacitor. The geared motors meet IP-44. These gearmotors also meet NEC Class I, Division 2 standards for use in environments where flammable gases or vapors may accidentally be spilled or leak into the operating area. Bodine Literature no. 07481130A (last update 04/2021).

Download PDF
E-Mail

2019 Standard Products Overview (4-page version)

We offer over 1,400 stock models and thousands of custom gearmotor designs. If you are looking for a fractional horsepower (FHP, <746 Watts) gearmotor, motor or motor speed control -- AC, PMDC or BLDC -- our highly trained and experienced tech support staff can help you select the best product for your application. E-mail us: info@bodine-electric.com. Bodine literature no. 07481116E.

Download PDF
E-Mail

Hypoid PMDC Gearmotors – 130, 90 and 180VDC

The new type 33A7-25H2 and 33A7-30H3 hypoid gearmotor combines our high-performance 33A PMDC motor with our all new hypoid gearheads. The gearmotor’s high torque and efficient performance make it ideal for conveyor systems, food processing, medical equipment and factory automation. Bodine literature no. 07481127A (Last update 09/2020).

Download PDF
E-Mail

2019 Standard Products Brochure (8-page version)

With over 1,300 stock models to choose from, this brochure will help you to get started in your product research. If you are looking for a fractional horsepower (FHP, <746 Watts) electric motor, gearmotor or control -- AC, DC or BLDC -- our highly trained and experienced tech support staff can help you select the best product for your application. Bodine literature no. 07481099E (Last Update 07/2019).

Download PDF
E-Mail

SCR Rated PMDC Gearmotors - 90V or 180V at 2500rpm

To provide greater flexibility and compatibility with unfiltered SCR speed controls, Bodine now offers over (100) 90VDC and 180VDC “SCR Rated” gearmotors with a maximum rated armature speed of 2500 rpm. These new gearmotors feature a Class F insulation system, and the windings were designed and tested to operate with an unfiltered DC speed control. The gearmotors are direct drop-ins for many Baldor, Bison or Leeson gearmotors. We recently added (24) new Hypoid gearmotors to this family of products. Bodine literature no. 07481123B2 (12/2020).

Download PDF
E-Mail

Planetary PMDC Gearmotors- Type 24A4-60P (IP-66)

These new high-performance 24A4-60P PMDC gearmotors feature our all-new 60mm planetary gearhead, and provide up to twice the torque of conventional helical/spur parallel shaft gearheads. Their rugged design, high torque density and high efﬁciency make them an ideal drive solution for industrial automation applications, packaging equipment, and for a wide range of solar- or battery-powered equipment. Metric and US models are available. Motors are sealed to IP-66 standards. Lit No. 07481113A (last update 09/2019).

Download PDF
E-Mail

Introduction to Planetary Gearmotors

App Note: Planetary gearheads are sometimes called “epicycloidal” gearheads because the points on the rotating planets trace epicycloidal curves as they turn. Planetary gearheads are typically comprised of a sun gear, a ring gear, and a planet carrier assembly with three to five planet gears per stage. Planetary gear trains are popular in applications where more torque is required from a smaller gearmotor package. Bodine literature no. 07470051A (09/2020).

Download PDF
E-Mail

34R-WX Parallel Shaft AC 3-Phase Inverter Duty Gearmotor

Our WX gearhead is now available with our inverter-duty, AC three- phase type 34R4 winding. The WX is a high-torque gearhead, built to provide longer life and higher performance than gearmotors of similar size. The dual voltage, 230/460VAC rated winding makes this gearmotor compatible with many AC inverter drives (VFDs) and for many industrial applications. 07481126A (10/2019).

Download PDF
E-Mail

Inverter-Duty AC Gearmotors

Our type 34R-Z, 34R-FX, 42R-FX, and 42R-5L/H inverter duty, three-phase gearmotors deliver maintenance-free performance. Designed to drive demanding applications like conveyor systems, food processing equipment, medical equipment and factory automation. Right angle, hollow- and parallel-shaft models rated from 1/6 and 3/8HP, with speeds from 5.7-340 rpm, and up to 350 lb-in torque. 07481133A (08/2020).

Download PDF
E-Mail

10 New Hollow Shaft Gearmotors and Accessories - AC & PMDC Options

Hollow shaft gearmotors connect directly to the driven load, reducing the overall size of the assembly by eliminating expensive shaft couplings, mounting hardware, or chains and sprockets. Gearmotor accessories include single- and double-extension, stainless steel driveshafts, shaft covers and black anodized mounting flanges. Bodine literature no. 07481045.G (1/2022).

Download PDF
E-Mail

12/24VDC, 34B/SR-WX, C1/D2 Brushless DC Gearmotors with Speed Control

Our 34B/SR-WX, brushless DC, 12 or 24VDC, INTEGRAmotor gearmotors are ideal for low-voltage applications in remote locations that operate off-grid, from battery or solar power. These gearmotors are also suitable for a wide range of industrial or medical applications that only allow low-voltage electronics due to user-safety considerations. The gearmotors feature a built in speed control with speed pot, and are IP-44 with proper conduit installed. These standard products are also UL listed for operation in hazardous locations per NEC, Class I, Div 2 environments (Groups A, B, C or D). Bodine literature no. 07481114.A [07/2020].

Download PDF
E-Mail

Special Order 34R-WX, C1/D2 AC Fixed-Speed or Inverter-Duty Gearmotors

Our type 34R-WX AC gearmotors meet NEC Class I, Division 2 standards for use in environments where flammable gases or vapors may accidentally be spilled or leak into the operating area. Fixed-speed (PSC) models include a factory-installed terminal box, terminal block, and capacitor. Inverter-duty models include the terminal box and an optional terminal block. These gearmotors are designed for applications such as conveyor systems, packaging equipment, metering devices, and commercial appliances. Minimum order quantities and lead times apply for these products. Bodine literature no. 07481120.A (02/19/20).

Download PDF
E-Mail

22B/SR (analog) & 22B/FV (digital) 24VDC INTEGRAmotors and Gearmotors

Compact, high-performance all-in-one, 24 VDC brushless DC (ECM) drive solutions. SR controls provide a simple control solution with easy‑to‑use features. Our FV control models feature PWM interface and a built in optical encoder. INTEGRAmotors and gearmotors are ideal for medical equipment, packaging machines, conveyor systems, factory automation, and remote location applications. Bodine literature no. 07481049B.

Download PDF
E-Mail

WPM - 12V and 24V DC Motor Speed Controls [Chassis]

These type WPM motor speed controls operate from a DC power supply or from a battery -- Input Voltage Range: 12-14 VDC or 24-35 VDC (dependent on model). Models 0788 and 0789 drive Bodine 24V PMDC motors and gearmotors up to 1/3 HP. Models 0786 and 0787 drive custom 12V PMDC motors and gearmotors. E-mail to info@bodine-electric.com for details. RoHS compliant. cURus. Bodine literature no. 07481103.rev.A.

Download PDF
E-Mail

WPM - Filtered DC Motor Speed Controls [115VAC Input]

The WPM filtered control provides high torque and lower operating temperatures. It features pulse width modulation (PWM) circuitry for precise speed control. DIP switches allow the control to be easily calibrated for different size motors. Controls are available with either ¼” quick connect tabs or a plug-in terminal block. RoHS compliant. Bodine literature no. 07481084B.

Download PDF
E-Mail

34B/FV INTEGRAmotor and Gearmotors

The type 34B/FV INTEGRAmotor™ combines a PWM speed control, a brushless DC motor and an optical encoder into one innovative drive solution. Gearmotor options are also available. The brushless DC INTEGRAmotor is designed to be a lower cost alternative for applications that typically require stepper or high-end servo systems. It is an excellent choice for replacing traditional brush-type DC motors in applications that operate continuously, eliminating downtime for brush maintenance. The 34B/FV INTEGRAmotor and gearmotors are rated IP-44. Bodine literature no. 07481079C.

Download PDF
E-Mail

42A5-FX High-Performance PMDC Gearmotors 90/130 VDC or 12/24 VDC

Forty new 42A5-FX permanent magnet (PM) DC gearmotors provide up to 40% more torque than previous E/F models. The 42A5-FX is ideal for fixed and variable speed applications. Rated output speeds: 500 to 3 RPM (5:1 to 300:1). Up to 3/8HP (280 Watts) and 350 lb-in (40 Nm). Accessory shaft option available for brakes and encoders. Gearhead features synthetic lubricant and hardened helical steel gears. Bodine literature no. 07481107.A.

Download PDF
E-Mail

42R6-FX 3-Wire-Reversible AC, PSC Gearmotors 115V/60/1-Ph

Our new 42R6-FX, AC, fixed-speed gearmotors provide up to 40% more torque than previous E/F models. High-performance synthetic lubricant allows the FX gearhead to operate at a wider temperature range and more effciently. Hardened helical steel gears and upgraded needle bearings allow for more torque and 25% longer product life. The 42R6-FX is driven by our new 42R6-frame 115 VAC/60 Hz, single-phase 1/4 HP (186 Watts) AC motor, and can produce up to 350 lb-in. (40 Nm) continuous torque. Models are available with gear ratios ranging from 5:1 to 300:1 and rated output speeds of 5.7 to 340 RPM. Bodine literature no. 07481109A (01/2014).

Download PDF
E-Mail

High-Torque Type CG, AC and PMDC Gearmotors - up to 1000 lb-in

The CG gearhead was developed specifically for Bodine’s most powerful variable speed electric motors, the 48R6 AC inverter-duty, and 42A7 permanent magnet DC motors. This integral gearmotor design allows the CG to deliver up to 1,000 lb-in. of torque. Bodine literature no. 07481066D. [03/2015]

Download PDF
E-Mail

Internal (Built-In) Encoder Options for OEM Applications

This PDF file describes the features and specifications of various internal encoder option that are offered by Bodine for custom (built-to-order) 33A and 42A Permanent Magnet DC (PMDC) gearmotors and motors, and for custom 22B and 34B Brushless DC gearmotors and motors. Lit P/N 07481062E.

Download PDF
E-Mail

Inverter Duty AC - Type 30R-3RD, 42R-HG and 48R-CG

PACESETTER™ AC Inverter Duty, three-phase gearmotors are available with various Bodine gearheads: including the types 3RD, HG and CG. Typical applications for these variable speed gearmotors include conveyor systems, food processing equipment, medical equipment and factory automation. Bodine also stocks a full line of speed controls for Pacesetter motors. Bodine literature no. 07481064D. [03/2015]

Download PDF
E-Mail

Inverter Duty, 230/460 VAC Gearmotors and Motors

These new dual-voltage models are available with both right-angle and parallel shaft gearheads. They offer a range of torque, speed and horsepower to fit a wide variety of OEM applications. Lead Time: all models typically ship within three to four business days. Bodine literature no. 07481089C.

Download PDF
E-Mail

Low-Voltage Type "WX" BLDC and PMDC Stock Gearmotors

The new WX gearhead is available with Bodine’s 34B Brushless DC motors and 33-frame permanent magnet DC motors. The WX is a new high-torque gearhead, built to provide longer life and higher performance than similar gearmotors in the same size range. Bodine literature no. 07481096B.

Download PDF
E-Mail

Model 2994 - NEMA-4X Pacesetter AC Motor Speed Control

OBSOLETE -- We have phased out this control and are offering a lower cost alternative -- Model 2999. Model 2999 is also an AC Motor speed control for 230 VAC, 50 or 60 Hz, inverter-duty, 3-phase gearmotors and motors ranging from 1/8 HP to 1 HP (746 watts). It operates from a single-phase, 115 or 230 VAC line. The control does not support remote operation. Bodine literature P/N 07481076B.

Download PDF
E-Mail

Model 2998 - NEMA-1 Pacesetter AC Motor Speed Control

Model 2998 operates from single-phase, 115 or 208-230 VAC (50/60 Hz) line voltage. It is designed to power a wide range of 230 VAC, 50 or 60 Hz, inverter-duty, 3-phase gearmotors and motors; rated up to 1 HP (746 Watts). The control is simple to operate and requires no programming. The control is designed for stand-alone operation. Bodine literature P/N 07481077B.

Download PDF
E-Mail

Model 2999 - NEMA-4X Pacesetter AC Motor Speed Control

Download to view this resource

Download PDF
E-Mail

Optimized Gearmotors for Green and Low-Voltage Applications

Our expertise in gear design and electrical design allows us to propose many small design modifications that add up to a high performance solution. Gearmotor and motor solutions from Bodine Electric can help you optimize your power management and system efficiency. Bodine literature no. 07481091B.

Download PDF
E-Mail

Special-Order 12 VDC PMDC Gearmotors, Motors and Controls

Bodine Electric offers a range of 12 Volt permanent magnet DC (PMDC) gearmotors and motors, up to 1/8 HP. They are available with a variety of gearboxes, providing wide speed range. Torque ratings are up to 310 lb-ins. When paired with Bodine’s WPM—12 VDC speed control, they provide a complete, single-source motion control system. Special-order items are custom designed to OEM application requirements. Minimum order quantities apply. Bodine literature no. 07481088B.

Download PDF
E-Mail

Special-Order Type 48B Brushless DC (ECM) Motors/Gearmotors

We manufacture a wide range of application specific (custom designed) brushless DC motors and gearmotors for OEM applications. The 48B delivers up to 1.5 HP (1100 Watts) output at 260V DC (3000 RPM). Windings are available from 48 VDC to 260 VDC. Options such as accessory shafts, brakes, or encoders can also be supplied. Minimum order quantities apply. Bodine literature no. 07481100A.

Download PDF
E-Mail

Type 3RD - Double Reduction, Right-Angle Gearmotors

The type 3RD gearmotors are designed for applications that require very slow rotation and high torque. The compact design is ideal for applications where space is limited. Available with AC, PMDC or brushless DC windings. Bodine literature no. 07481051 rev.C.

Download PDF
E-Mail

Type HG Gearmotors Provide High Torque in a Compact Package

This offset parallel shaft gearhead provides flexible mounting and high torque in a small package. All type HG gearmotors are totally enclosed with IP-20 rating (IP-44 with optional t-box kit installed). The unvented gearhousing allows for universal horizontal mounting. The gearhed is permanently lubricated with high-performance lubricant. The gearmotors also feature industrial lip type seals on motor and output shafts. Needle bearings for increased radial load capacity and long life, large ball bearings on the output shaft. Hardened helical and spur gearing for quietness and high output to size ratio. This standard Bodine product can also be customized to allow for alternate windings, mounting, or hollow shaft configuration. Bodine literature no. 07481054B.

Download PDF
E-Mail

Isolation Board - Model 3984 - Brochure

Our Isolation and Interface Board, model 3984, allows remote control of one or more speed controls. It can replace an isolation transformer, allowing equipment with different ground-referenced circuitry to work together. Works with most basic speed controls. RoHS compliant. Bodine literature no. 07481086B.

Download PDF
E-Mail

Introduction to Brushless DC Gearmotors and Motors

Brushless DC motors require less maintenance, provide long life, low EMI, and quiet operation. They produce more output power per frame size than AC or permanent magnet DC motors and gearmotors. Low rotor inertia improves acceleration and deceleration times while shortening operating cycles, and their linear speed/torque characteristics produce predictable speed regulation. With brushless DC motors, brush inspection is eliminated, making them ideal for limited access areas and applications where servicing is difficult or not desired. Low voltage models are ideal for battery operation portable equipment, or medical applications where shock hazards cannot be tolerated. Bodine literature no. 07481111A.

Download PDF
E-Mail

UPM - Unfiltered DC Motor Speed Controls

The UPM unfiltered control draws lower AC line current than comparable SCR filtered controls. DIP switches allow the control to be easily calibrated for different size motors. Controls are available with either ¼” quick connect tabs or a plug-in terminal block. Input Voltage: Chassis model operates from either 115 VAC or 230 VAC (50/60Hz) line, selectable with plug-in jumper; the enclosed model features a factory installed 115 Volt AC line cord. Output Voltage: 0-90 VDC; 0-180 VDC. RoHS compliant. Bodine literature no. 07481085B.

Download PDF
E-Mail

WPM - Filtered DC Motor Speed Control with Dynamic Braking [115VAC Input]

Our model 0794 is a filtered DC motor speed control with dynamic braking feature. Input: 115VAC +/- 10%, 50/60 Hz, single-phase. Output: 0-130 VDC. The control provides higher torque, longer brush life, and lower operating temperatures than unfiltered controls. It features pulse width modulation (PWM) circuitry for precise speed control. DIP switches allow the control to be easily calibrated for different motors sizes. RoHS compliant. Bodine literature no. 07481104A.

Download PDF
E-Mail

High Torque Type HG, AC and PMDC Gearmotors - up to 1000 lb-in

The HG offset gearhead provides flexible mounting and high torque in small package. It was developed specifically for Bodine 42R AC inverter-duty, and 33A permanent magnet DC motors. The HG delivers up to 1,000 lb-in. of torque. Bodine literature no. 07481054B. [06/2019]

Download PDF
E-Mail

Home > Support > Literature > Product Brochures

Product Brochures

Planetary BLDC Gearmotors- Type 22B-60P (24V & 130VDC)

Hypoid PMDC Gearmotors – 12 or 24VDC

42R6-HG/H [AC] Hollow Shaft and 42R6-HG Parallel Shaft Offset Gearmotors

33A7-HG/H [PMDC] Hollow Shaft and 33A7-HG Parallel Shaft Offset Gearmotors

34R6-FX AC C1/D1 Inverter-Duty Ex-Proof Gearmotors

34B6-FX BLDC C1/D1 Brushless Dc Ex-Proof Gearmotors

34R-FX AC C1/D2 Inverter-Duty Gearmotors / IP-44

34R-FX AC C1/D2 Fixed-Speed PSC Gearmotors / IP-44

2019 Standard Products Overview (4-page version)

Hypoid PMDC Gearmotors – 130, 90 and 180VDC

2019 Standard Products Brochure (8-page version)

SCR Rated PMDC Gearmotors - 90V or 180V at 2500rpm

Planetary PMDC Gearmotors- Type 24A4-60P (IP-66)

Introduction to Planetary Gearmotors

34R-WX Parallel Shaft AC 3-Phase Inverter Duty Gearmotor

Inverter-Duty AC Gearmotors

10 New Hollow Shaft Gearmotors and Accessories - AC & PMDC Options

12/24VDC, 34B/SR-WX, C1/D2 Brushless DC Gearmotors with Speed Control

Special Order 34R-WX, C1/D2 AC Fixed-Speed or Inverter-Duty Gearmotors

22B/SR (analog) & 22B/FV (digital) 24VDC INTEGRAmotors and Gearmotors

WPM - 12V and 24V DC Motor Speed Controls [Chassis]

WPM - Filtered DC Motor Speed Controls [115VAC Input]

34B/FV INTEGRAmotor and Gearmotors

42A5-FX High-Performance PMDC Gearmotors 90/130 VDC or 12/24 VDC

42R6-FX 3-Wire-Reversible AC, PSC Gearmotors 115V/60/1-Ph

High-Torque Type CG, AC and PMDC Gearmotors - up to 1000 lb-in

Internal (Built-In) Encoder Options for OEM Applications

Inverter Duty AC - Type 30R-3RD, 42R-HG and 48R-CG

Inverter Duty, 230/460 VAC Gearmotors and Motors

Low-Voltage Type "WX" BLDC and PMDC Stock Gearmotors

Model 2994 - NEMA-4X Pacesetter AC Motor Speed Control

Model 2998 - NEMA-1 Pacesetter AC Motor Speed Control

Model 2999 - NEMA-4X Pacesetter AC Motor Speed Control

Optimized Gearmotors for Green and Low-Voltage Applications

Special-Order 12 VDC PMDC Gearmotors, Motors and Controls

Special-Order Type 48B Brushless DC (ECM) Motors/Gearmotors

Type 3RD - Double Reduction, Right-Angle Gearmotors